General
This electronics is intended for heating of model engines glow plugs. It works with all standard RC receivers. The glow battery should be a 2S LIPO. All plugs are controlled separately and each plug has an own monitoring red LED. The brightness of the LED shows the glow current of this LED. If one plug is broken, this LED will be off and all others will work normally. Like the former GLOW_LP it works in two modes : Starting mode to start the engine and after that the running mode.
Starting mode : Full glow strength, the glow plugs light orange. Running mode : Half glow strength in idle position or less up to half speed. Above half speed no glowing. At idle the glow plugs are still dark, though they are heated. Detecting of wet plugs : A common problem of radial engines is that the lower plugs are getting wet after a long idle run and turn off the glowing. The GLOW2C detects a wet plug and increases the current of this plug as long as it is wet.